Product List
Abrasive Belts
Automatic Parts
Bader Grinders/Accessories
Baldor Buffers & Accessories
Bandsaw Blades
Belt Lubricant
Buffing Supplies
Burrs
Counterbores
Drill Bits
End Mills
Epoxy
Flux
Folder Pivot Bolts
Glue
Grinding Disk
Handle Bolts
Handle Material
Handle Pins
Jewelry Files
Knife Cases
Magnets
Micro Lathe & Accessories
Polishing Cloths
Reamers
Renaissance Wax
Safety Tape and Finger Cotts
Sanding Disk
Sand Paper
Screws
Silver Solder
Spacer Material
Spring Wire
Stainless Steel 416 Rod
Steel
Bader Grinders & Accessories
Taps
Threaded Pivot Studs
Titanium
Tomahawk Supplies

MIRACLE POLISHING CLOTHS

Mild abrasive polishing cloth

3.50

Norton non-abrasive polishing cloth- 16" x 16"

4.50
SAFETY TAPE and FINGER COTTS
Click to enlarge

SAFETY TAPE — self sticking gauze safety tape. A few turns on your thumb and forefinger eliminates the need for awkward gloves. Complete dexterity; unaffected by water.

1” X 30 Yard Roll
2.00
Sleeve of 12 Rolls 23.00
FINGER COTTS Leather finger protectors
1.25
BUFFING COMPOUND

Buffing Compound

Agressive Approx 3 lb bar Heavy Coarse Cutting $9.50
Buffing Compound Gray Approx 3 lb bar Light Cut and Polish $9.50
Buffing Compound
White Mirror Approx 3 lb bar Final Polish $12.00
BUFFING WHEELS

8” DIA.

1/2” Bore One Row Stitching 80/80 Thread Count 20 Ply 1/4" thick $4.75
8” DIA. 1/2” Bore 3/8” Spaced Stitching 80/80 Thread Count 20 Ply 1/4" thick $5.75
10” DIA. 3/4” Bore One Row Stitching 80/80 Thread Count 20 Ply 1/4" thick $6.50
10" DIA. 3/4" Bore 3/8" Spaced Stitching 80/80 Thread Count 20 Ply 1/4" thick $7.50
8" DIA. 1/2" Bore One Row Stitching 60 Ply 3/4" thick $13.50
8" DIA. 1/2" Bore 3/8" Spaced Stitching 60 Ply 3/4" thick $15.00
10" DIA. 3/4" Bore One Row Stitching 60 Ply 3/4" thick $16.95
10” DIA. 3/4” Bore 3/8” Spaced Stitching 60 Ply 3/4" thick $19.95
BIAS PLY BUFFS

These are stocked in two grades. SPECIFY — Hard for cutting or Soft for high polish.
Each Bias Ply Buff is approximately 3/4” thick. The over all cost is about the same as regular buffs, but the Bias Ply Buffs work cooler, last longer and will give a better finish.

8” DIA.

Bias Ply Buffs Pleated material 3” metal center $7.00

10” DIA.

Bias Ply Buffs Pleated material 3” metal center $8.00

12” DIA.

Bias Ply Buffs Pleated material 3” metal center $9.50

Extra center plates for the above buffs are available with the following arbor sizes:

1/2”, 3/4”, 5/8”, 7/8”, 1”, 1 1/4”

2.00

Home | Specials | Contact | Order



Powered by ...